Stainless Pipe Outer Polyethylene Tape For Elbow Pipe
Basic Info
Model No.: T300
Product Description
oil pipe joint wrapping tape & Accessory Products
Xunda carries a full line of products to complement the main line coating systems and meet the challenges of modern pipeline activities.
Utility work: hand-applied tape products for gas utility, oil field, and plumbing applications on small diameter pipe.
Coating repair: cold-applied tape products for plant and field repair of main line coating systems.
Specialty fittings and fabrication work: a variety of tape systems and mastics that conform to irregularly-shaped pipe.
Field joints: single-sided and double-sided tape systems that conform to bell and spigot, welded and mechanically-coupled field joints.
ROW construction: Rock shield system, tie-in, and above-ground tape systems for use at the job site by the pipeline contractor.
Offshore Tapes: Whether replacing PVC on welded joints or protecting Pier Pilings, Xunda has the tape coating for the job.
Product | Uses & General Characteristics | Total | Adhesion | Maximum |
1027 | Solvent-based primer designed for brush, roller or spray application to mechanically cleaned pipe surfaces. Contains stress-corrosion cracking inhibitors. | N/A | N/A | 100°C |
910 | ALL-purpose tape system for field application in the oil patch. | 0.25 mm | 11 N/10 mm | 66°C |
900 | General utility tape for hand application on small diameter pipe, joints and fittings. | 0.30 mm | 11 N/10 mm | 66°C |
930(-35) | Heavy duty joint wrap tape for hand wrapping in applications where higher shear properties are required. Designed without release liner for less waste and ease of use. | 0.89 mm | 25 N/10 mm | 66°C |
932(-35) | Cold-applied tape system with an elevated high-tack adhesive. Provides excellent conformability when hand applied to field joints, fittings and specialty piping. EN/DIN B30 Qualified. | 0.89 mm | 28 N/10 mm | 66°C |
932(-50) |
| 1.27 mm | 28 N/10 mm | 66°C |
934(-35) | Cold-applied tape system with a high tack adhesive. Used as a patch/repair system and as the primary corrosion protection system on field joints, fittings and specialty piping. | 0.89 mm | 28 N/10 mm | 66°C |
934(-50) |
| 1.27 mm | 35 N/10 mm | 66°C |
939 | 100% solids mastic designed as a self-adhering filler material prior to overcoating with Polyken joint coating tape systems. | 3.17 mm | 33 N/10 mm | 93°C |
954 | Mechanical protection layer for use with all of the Polyken joint wrap coating products. Easy hand or (outer wrap) (outer wrap) machine application. | 0.38 mm | N/A (outer wrap) | 85°C |
|
Application
1 Rust Removal
Steel Surface needs treating. Its quality shall reach Sa2 or St3 grade as prescribed in GB8923-88 Pre-paint Steel Surface Rust Grade and Rust-removal Grade, and it shall be dust-free.
2 Priming
Primer shall be stirred well before painting. An even film of primer is painted on the steel surface that is rust-removed completely and dust-free. After the primer dries up (one may feel no sticky). The steel pipe can be wrapping with tape (it usually takes 3 to 5 minutes). The primer dosage usually amounts to 80 to 100g / m².
3 Inner Tape (Anti corrosion Tape) & Outer Tape (Protection Tape) Wrapping
The steel pipe that is painted with primer is wrapping with tape by means of suitable devices or tools as per joint needs, and wraps the inner tape and then wraps the outer tape. Tape tensibility can be 10 to 20 N / cm. The overlapped length between beginning and end of an adhesive tape shall be no less than 1/4 circumference of the steel pipe and the total length of adhesive tape shall be no less than 100mm. each film shall be paralleled, and must not be twisted and rumpled.
TRADE TERMS:
1 Payment: 30% T/T DEPOSIT PAYMENT IN ADVANCE, BALANCE AGAINST COPY OF B/L, WESTERN UNION, ESCROW, L/C.
2 Production Lead Time: 10 - 15 DAYS AFTER DEPOSIT PAYMENT.
3 Shipping Methods: OCEAN FREIGHT / AIR FLIGHT /COURIER PRESS
4 FOB Shipping port: QINGDAO, SHANGHAI ,OTHER PORTS, MAINLAND CHINA.
5 If you want to deal with EXW/CIF/CNF term instead of FOB, please specify. Otherwise, FOB price will be quoted under inquiry.
OUR SERVICE:
· Your inquiry related to our product & price will be replied within 24hours.
· Well-trained & experienced staffs are to answer all your inquiries in English of course.
· Working time: 8:30am - 6:00pm, Monday to Saturday (UTC+8).
· OEM & ODM projects are highly welcomed. We have strong R&D team here to help.
· Your business relationship with us will be confidential to any third party.
· Good after-sale service offered, please get back if you got question.
OUR ADVANTAGES
1 More than 10 years of pipeline coating experience
2 Certified by ISO9001:2000 system and ISO14001:2004,make sure all tapes are premium and eco-friend;
3 Global presence in oil , gas and water industrial
4 Our business relationship will be high confidential to any third party;
Well-trained & experienced Sales team offer best and careful service before and after sales
Product Categories : Anticorrosion Pipe Wrap Tape > pipeline Joint Tape